|
more info...
|
|
|
|
|
|
|
Stonel Position transmitters provide a precise 4 to 20 mA signal on a two wire DC loop.
|
|
|
|
more info...
|
|
|
|
|
|
|
Position Indicator for Series II Valve
Reliable valve position feedback for Series II valve
|
|
|
|
more info...
|
|
|
|
|
|
|
The Dual Module VCT integrates position sensing, communication electronics, power outputs, auxiliary inputs and wire termination into a fully epoxy sealed compact package.
|
|
|
|
more info...
|
|
|
|
|
|
|
Maxx-Guard Reed Switches - available in SPST. These hermetically sealed proximity switches are ideal for computer input circuits. SPST is ideally suited for 24 VDC or 120 VAC inputs. Optional LED indication brightly displays switch status.
|
|
|
|
more info...
|
|
|
|
|
|
|
The dual module integrates two separate sensor circuits and solenoid wire terminations in an epoxy sealed module. Sensor circuits are available in either SST switching or Namur outputs. Each SST sensor circuit and each Namur sensor circuit are electrically isolated. Although they are packaged together they operate independently.
|
|
|
|
more info...
|
|
|
|
|
|
|
Solid state SST proximity sensors are ideal for use in AC and DC computer input circuits.
|
|
|
|
more info...
|
|
|
|
|
|
|
StoneL’s Eclipse features dual integrated solid state sensors with optional communications integrated into a sealed module. The function module and trigger/indicator attach directly to standard VDI/VDE 3845 (Namur) actuator accessory mounting pads quickly and conveniently. The Eclipse series is available in a nonincendive version (ECN) for hazardous division 2 areas and in a general purpose micro connector version (ECG) for non-hazardous applications.
|
|
|
|
more info...
|
|
|
|
|
|
|
The solid state Hawkeye sensor is ideal for point sensing in corrosive and hazardous process environments. The standard Red/Green LEDs also
speed your setup and installation by confirming power up and switch status. The Hawkeye is FM and CSA approved for nonincendive applications and intrinsically safe circuits in hazardous areas.
|
|
|
|
more info...
|
|
|
|
|
|
|
StoneL Double-pole double-throw mechanical switches enable two electrical circuits to be activated simultaneously.
|
|
|
|
|
|
more info...
|
|
|
|
|
|
|
StoneL's Onyx with Cyclone integral solenoid valve saves you valuable set up and installation time. The Cyclone is a high flow, low power solenoid valve with the pilot solenoid protected within the Onyx Lexan enclosure. The Onyx with Cyclone eliminates your need for junction boxes, connectors and extra wiring. Optional pre-wired quick connect cabling offers extra protection from moisture and corrosives and further reduces wiring cost.
|
|
|
|
more info...
|
|
|
|
|
|
|
The Prism Series, designed for corrosive process environments, attaches directly to Sanitary Diaphragm and Angle Valves. The platform offers a full array of communication and switching options as well as discrete integral pneumatic control for single-acting valve actuator operation.
|
|
|
|
more info...
|
|
|
|
|
|
|
The Quartz explosion/flame-proof design is FM/CSA approved and ATEX certified for
use in harzardous environments. With the epoxy coated anodized aluminum enclosure,
it may be used in corrosive heavy wash down areas as well.
The Quartz series offers one of the most versatile platforms for adapting to a variety
of valve systems. Stainless steel mounting system is ready available to attach
the Quartz to quarter-turn actuators, manual operators, linear operators and
positioners.
|
|
|
|
more info...
|
|
|
|
|
|
|
Stonel's general purpose engineered resin SolaR offers unparalleled value. SolaR's
quick set cams, multiple conduit entries, and quick lock partial turning cover
allow rapid set-up and installation. Electrical options include mechanical switches,
Maxx-Guard hermetically sealed switches, SST solid state sensors, Namur sensors
and dual module communication terminals.
|
|
|
|
more info...
|
|
|
|
|
|
|
Clearly view valve position status from up to 75 feet with StoneL’s Stand Alone Visual Indicator. The indicator’s rugged Lexan® construction makes the indicator resistant to physical damage and tolerant to most corrosives.
|
|
|
more info...
